Adhering non-slip cloth to fabric can effectively improve the non-slip performance of the item, preventing the item from sliding or the instability that will occur during the sliding process. Below is a common method of sticking non-slip fabrics, which is shared with you.

　　Required materials:

　　1. non-slip cloth: can be purchased at craft shops or online.

　　2. Fabric: choose the appropriate material according to the usage requirements.

　　3. double-sided adhesive: make sure to choose a strong adhesive double-sided adhesive to ensure the non-slip cloth can be firmly stuck on the fabric.

　　4. scissors: used to cut the non-slip cloth and fabric.

Steps:

　　1. Preparation: Make sure the work surface is clean and tidy so as not to affect the adhesion effect. Prepare all the necessary materials.

　　2. Measuring and cutting: Cut the non-slip cloth and fabric to the required size using scissors.

　　3. Positioning: Lay the fabric flat on the work surface and place the non-slip fabric on the intended position of the fabric, making sure that the non-slip fabric is aligned with the edges of the fabric. You can use a large head pin to temporarily fix it on the fabric for better operation.

　　4. Open the double-sided adhesive: Remove the double-sided adhesive from the paper backing and apply it to the back of the non-slip fabric. Make sure the double-sided tape covers the whole surface of the non-slip fabric and make sure the double-sided tape is in close contact with the non-slip fabric.

　　5. Paste: Fit the non-slip cloth with one side of the double-sided adhesive to the predetermined position on the fabric and press gently to ensure that the double-sided adhesive is in full contact with the fabric. You can use your hand or a spatula to make sure there are no air bubbles.

　　6. Fixing: After the adhesion is completed, press the whole surface of the non-slip fabric again with fingers or squeegee to increase the firmness of adhesion.

　　7. Wait for drying: according to the instructions of the double-sided adhesive, wait for a period of time to ensure that the double-sided adhesive is dry and firmly bonded.

　　Warm tips:

　　1. clean the fabric used before the sticking operation to ensure the adhesion effect.

　　2. If necessary, add extra double-sided adhesive to the four corners of the non-slip fabric to ensure better fixing effect.

　　3. Larger areas of the fabric can be covered with more than one piece of double sided tape on the back of the fabric to increase the adhesion and firmness.

　　4. It is important to note that fabrics are suitable for direct double sided tape application and some materials may require special glues or stitching.

　　The above is a common way to attach the non-slip fabric to the fabric, hope it is helpful to you. Please feel free to let me know if you have any other questions specifically or need more guidance.